Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 NTP Configuration Commands
3Com Corporation
6-2
6.1.2 display ntp-service sessions
Syntax
display ntp-service sessions [ verbose ]
View
Any view
Parameter
verbose: Displays session details.
Description
Use the display ntp-service sessions command to view brief information about all
sessions maintained by the NTP at the local device.
Use the display ntp-service sessions verbose command to view details about all
sessions maintained by the NTP at the local device.
By default, the status of all sessions maintained by NTP at the local device is displayed.
Example
# Display brief information about all sessions maintained by NTP at the local device.
<3com> display ntp-service sessions
source reference stra reach poll now offset delay disper
********************************************************************
[5]1.1.1.1 0.0.0.0 16 0 64 - 0.0 0.0 0.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Table 6-1 Description on the fields of the display ntp-service sessions command
Field Description
source IP address of the clock source
reference ID of the reference clock
stra Stratum of the local clock
reach
Reachability of the reference clock: 0 is
reachable; 1 is unreachable
poll
Interval between received/transmitted
messages
now
Time elapsed since the last NTP
message was received
offset
Offset of the local clock to the reference
clock
delay Round-trip delay