Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 NTP Configuration Commands
3Com Corporation
6-3
Field Description
disper
Clock dispersion relative to the
reference clock
note: 1 source(master),2 source(peer),3
selected,4 candidate,5 configured
Remark on the number enclosed by the
square brackets in front of the source IP
address. This number indicates type of
the clock source
6.1.3 display ntp-service status
Syntax
display ntp-service status
View
Any view
Parameter
None
Description
Use the display ntp-service status command to view status about the NTP service.
Example
<3com> display ntp-service status
clock status: unsynchronized
clock stratum: 16
reference clock ID: none
nominal frequency: 100.0000 Hz
actual frequency: 100.0000 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 0.00 ms
reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 6-2 Description on the fields of the display ntp-service status command
Field Description
synchronized
Indicates that the local system is
synchronized to a remote NTP server or
a clock source