Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 NTP Configuration Commands
3Com Corporation
6-9
6.1.10 ntp-service max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view
Parameter
number: Number of sessions allowed to be established locally. It is in the range 0 to
100.
Description
Use the ntp-service max-dynamic-sessions command to set the number of sessions
allowed by the local device.
Use the undo ntp-service max-dynamic-sessions command to restore the default,
or 100.
Example
# Set the number of sessions allowed by the local device to 50.
[3com] ntp-service max-dynamic-sessions 50
6.1.11 ntp-service multicast-client
Syntax
ntp-service multicast-client [ X.X.X.X ]
undo ntp-service multicast-client [ X.X.X.X ]
View
Interface view
Parameter
X.X.X.X: Multicast IP address, or a class D address.
Description
Use the ntp-service multicast-client command to configure NTP multicast client
mode.
Use the undo ntp-service multicast-client command to cancel NTP multicast client
mode.