Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-17
View
User view
Parameter
None
Description
Use the lock command to lock the illegitimate users out of the active user interface,
which can be console, AUX, or VTY.
After entering the lock command, you are prompted to enter and confirm the
screensaver's password. If you enter the same password twice, the interface is locked.
To unlock and access the system after that, you must press <Enter> first and enter the
password you just set.
Example
# Log in through the console port and lock the active user interface.
<3Com> lock
Password:
Again:
1.1.19 log startup
Syntax
log startup
undo log startup
View
User view
Parameter
None
Description
Use the log startup command to turn on the configuration restoration log switch.
Use the undo log startup command to turn off the configuration restoration log switch.
By default, the configuration restoration log switch is turned on.
When the configuration restoration log switch is turned on, the commands executed for
the configuration file to be recovered at startup are logged and the log information is
output in the following format: