Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-1
Chapter 7 SNMP Configuration Commands
7.1.1 debugging snmp-agent
Syntax
debugging snmp-agent { header | packet | process | trap }
undo debugging snmp-agent { header | packet | process | trap }
View
User view
Parameter
header: Enables header debugging.
packet: Enables packet debugging.
process: Enables process debugging.
trap: Enables trap debugging.
Description
Use the debugging snmp-agent command to enable SNMP agent debugging and
specify the information to be output.
Use the undo debugging snmp-agent command to disable SNMP agent debugging.
By default, SNMP agent debugging is disabled.
Example
# Enable header debugging of the SNMP agent.
<3com> debugging snmp-agent header
7.1.2 display snmp-agent
Syntax
display snmp-agent { local-engineid | remote-engineid }
View
Any view
Parameter
local-engineid: Engine ID of the local SNMP entity.