Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-3
7.1.4 display snmp-agent group
Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameter
group-name: Specifies the group name of the SNMP information to be displayed, in the
range 1 to 32 bytes.
Description
Use the display snmp-agent group command to view information about the specified
or all user security model (USM) based groups, including group name, security model,
storage type.
Example
# Display SNMP groups and their security model.
<3com> display snmp-agent group
Group name: v3r2
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
The following table describes the output fields:
Table 7-1 Description on the fields of the display snmp-agent group command
Field Description
Groupname
SNMP group name corresponding to the
user
Security model Security model of SNMP
Readview
Name of the read-only MIB view
corresponding to the group
Writeview
Name of the write MIB view
corresponding to the group
Notifyview
Name of the notify MIB view
corresponding to the group
Storage-type Storage type