Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-18
%May 31 06:46:58:015 2005 5500G-EI SHELL/5/CMD:- 1 -task:CFM ip:** user:**
command:sysname 5500G-EI
As the log information may occupy a large space, you are recommended to turn off the
switch in normal cases.
Example
# Turn off the configuration restoration log switch.
<3Com> undo log startup
1.1.20 quit
Syntax
quit
View
Any view
Parameter
None
Description
Use the quit command to quit to a lower-level view (if the current view is user view, you
exit the system).
The views fall into three levels, in ascending order:
z User view (for user level 0)
z System view (for user level 3)
z Configuration view (such as routing protocol view, interface view, and VPDN
group view)
Related command: return.
Example
# Switch from Ethernet1/0/0 interface view to system view, and then to user view.
[3Com-Ethernet1/0/0] quit
[3Com] quit
<3Com>
1.1.21 return
Syntax
return