Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-5
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
The following table describes the output fields.
Table 7-2 Description on the fields of the display snmp-agent mib-view command
Field Description
View name View name
MIB Subtree MIB subtree
Subtree mask MIB subtree mask
Storage-type Storage type
ViewType: Included/excluded
Indicates that the access to a MIB object
is allowed or prohibited.
Active Indicates the state of lines in the table.
7.1.6 display snmp-agent statistics
Syntax
display snmp-agent statistics
View
Any view
Parameter
None
Description
Use the display snmp-agent statistics command to view the state and statistics
about SNMP.
Example
# Check the statistics about SNMP communication.
<3com> display snmp-agent statistics
0 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied