Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-8
SNMP version running in the system:
SNMPv3
Table 7-4 Description on the fields of the display snmp-agent sys-info command
Field Description
The contact person for this managed
node
Contact person for this device
The physical location of this node: Physical location for this device
SNMP version running in the system: SNMP version in use
7.1.8 display snmp-agent trap-list
Syntax
display snmp-agent trap-list
View
Any view
Parameter
None
Description
Use the display snmp-agent trap-list command to display whether trap sending is
enabled on each module.
Related command: snmp-agent trap enable.
Example
# Display whether trap sending is enabled on each module.
[3com] display snmp-agent trap-list
bgp trap enable
configuration trap enable
flash trap enable
ldp trap enable
lsp trap enable
ospf trap enable
standard trap enable
vrrp trap enable
system trap disable
Enable traps :8; Disable traps 1