Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-9
The command output shows that trap sending is enabled on all modules other than the
system module.
7.1.9 display snmp-agent usm-user
Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group
group-name ] *
View
Any view
Parameter
engineid: Displays information about the SNMPv3 users with the specified engine ID.
engineid-string: Character string of the engine ID.
username: Displays information about the specified SNMPv3 user.
user-name: User name, in the range 1 to 32 bytes.
group: Displays information about the users in the specified SNMP group.
group-name: Group name, in the range 1 to 32 bytes.
Description
Use the display snmp-agent usm-user command to view information about the
specified or all SNMP users.
SNMP users are users that remotely execute SNMP management operation.
Example
# Display information about all current users.
<3com> display snmp-agent usm-user
User name: authuser
Group name: 1
Engine ID: 8000007DB20000000C025808 active
Storage-type: nonVolatile
UserStatus: active
The following table describes the output fields.
Table 7-5 Description on the fields of the display snmp-agent usm-user command
Field Description
User name
The character string identifies the SNMP
user.