Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-10
Field Description
Group name
Name of the group to which the SNMP
user belongs
Engine ID
The character string identifies the SNMP
device.
Active Indicates the state of the SNMP user.
Storage-type Storage type of SNMP information
UserStatus State of the SNMP user
7.1.10 snmp-agent
Syntax
snmp-agent
undo snmp-agent
View
System view
Parameter
None
Description
Use the snmp-agent command to enable SNMP agent.
Use the undo snmp-agent command to disable SNMP agent.
By default, SNMP agent is disabled.
Note that you can enable SNMP agent with any snmp-agent command but not their
undo form. When SNMP agent is disabled, configuring the undo form of any SNMP
agent command is useless.
Example
# Disable the operating SNMP agent.
[3com] undo snmp-agent
7.1.11 snmp-agent community
Syntax
snmp-agent community { read | write } community-name [ [ mib-view view-name ] |
[ acl acl-number ] ]*