Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-14
excluded: Excludes the MIB subtree.
Description
Use the snmp-agent mib-view command to create or update the information about a
view.
Use the undo snmp-agent mib-view command to delete the view information.
By default, the view name is ViewDefault and the OID is 1.3.6.1.
This command accepts both variable OID strings and node names.
Related command: snmp-agent group.
Example
# Create a view that includes all MIB-II objects.
[3com] snmp-agent mib-view included mib2 1.3.6.1
7.1.15 snmp-agent packet max-size
Syntax
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
View
System view
Parameter
byte-count: Maximum length of the SNMP packets that the agent can receive/send, in
the range 484 to 17940 bytes. The default value is 1500 bytes.
Description
Use the snmp-agent packet max-size command to set the maximum length of the
SNMP packets that the agent can receive/send.
Use the undo snmp-agent packet max-size command to cancel the current setting.
Example
# Set the maximum length of SNMP packets that the agent can receive/send to 1042
bytes.
[3com] snmp-agent packet max-size 1042