Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-19
View
Any view except for user view
Parameter
None
Description
Use the return command to return to user view from any other view, as you would with
the hot key <Ctrl+Z>.
Related command: quit.
Example
# Return to user view from system view.
[3Com] return
<3Com>
1.1.22 super
Syntax
super [ level ]
View
User view
Parameter
level: User level ranging from 0 to 3.
Description
Use the super command to switch from current user level to a specified user level, or
the command level that the user can access.
There are four levels of commands:
z Visit: involves commands for network diagnosis (such as ping and tracert),
commands for accessing an external device (such as Telnet client, SSH client,
RLOGIN). Saving the configuration file is not allowed at this level.
z Monitor: includes the display and debugging commands for system maintenance,
service fault diagnosis. Saving the configuration file is not allowed at this level.
z System: provides service configuration commands, including routing and
commands at each level of the network for providing services.
z Manage: influences the basic operation of the system and the system support
modules for service support. Commands at this level involve file system, FTP,
TFTP, Xmodem download and configuration file switch, power control, standby