Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 SNMP Configuration Commands
3Com Corporation
7-15
7.1.16 snmp-agent sys-info
Syntax
snmp-agent sys-info { contact sysContact | location sysLocation | version { { v1 |
v2c | v3 } * | all } }
undo snmp-agent sys-info { contact | location | version { { v1 | v2c | v3 } * | all } }
View
System view
Parameter
contact: Sets the system contact.
sysContact: System contact string.
location: Sets the physical location of the node.
sysLocation: Physical location of the node.
version: Sets the SNMP version.
v1: SNMPv1.
v2c: SNMPv2c.
v3: SNMPv3.
*: Indicates to select from the three options of v1, v2c and v3, at least one and at most
all.
all: SNMPv1, SNMPv2c and SNMPv3.
Description
Use the snmp-agent sys-info command to set system information, including system
contact, physical location of the node, and SNMP version.
Use the undo snmp-agent sys-info command to cancel the current setting.
By default, the system contact is R&D Beijing, Huawei Technologies Co.,Ltd., system
location is Beijing China and the version is SNMPv3.
Related command: display snmp-agent sys-info.
Example
# Set the system contact to call Operator at 010-82882488.
[3com] snmp-agent sys-info contact call Operator at 010-82882488