Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 8 RMON Configuration Commands
3Com Corporation
8-3
Table 8-2 Description on the fields of the display rmon event command
Field Description
Event table 1 Event index 1
VALID
The event entry corresponding to the
index is valid
cause log-trap when triggered
The event causes log-and-trap
notification when triggered
last triggered at 0days 00h:02m:27s Last time the event was triggered
8.1.3 display rmon eventlog
Syntax
display rmon eventlog [ event-entry ]
View
Any view
Parameter
event-entry: Event index.
Description
Use the display rmon eventlog command to display the log table of RMON or the log
entry for the specified event.
The displayed information includes: index and current state of the event, time the log
entry was created (the elapsed time since system initialization/startup in centiseconds),
and event description.
Example
# Display the log entry for event entry 1.
<3com> display rmon eventlog 1
Event table 1 owned by null is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.