Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 8 RMON Configuration Commands
3Com Corporation
8-4
Table 8-3 Description on the fields of the display rmon eventlog command
Field Description
Event table 1 Event index 1
VALID
The event entry corresponding to the
index is valid
Generates eventLog 1.2 at 0days
00h:02m:27s
Last time the event was triggered
Description Event description
8.1.4 display rmon history
Syntax
display rmon history [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and number.
Description
Use the display rmon history command to display the history control table of RMOM
and information about the latest sampling, such as utilization, number of errors and
total number of packets.
Related command: rmon history.
Example
# Display the history information about interface Ethernet2/0/1.
<3com> display rmon history ethernet 2/0/1
History control entry 1 owned by null is VALID
Samples interface : Ethernet2/0/1<ifEntry.642>
Sampling interval : 10(sec) with 10 buckets max
Latest sampled values :
Dropevents :0 , octets :0
packets :0 , broadcast packets :0
multicast packets :0 , CRC alignment errors :0
undersize packets :0 , oversize packets :0
fragments :0 , jabbers :0
collisions :0 , utilization :0