Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 8 RMON Configuration Commands
3Com Corporation
8-6
Description
Use the display rmon prialarm command to display information about the prialarm
table of RMON or the specified prialarm entry.
Related command: rmon prialarm.
Example
# Display information about the prialarm table of RMON.
<3com> display rmon prialarm
Prialarm table 1 owned by null is VALID.
Samples absolute value : .1.3.6.1.2.1.16.1.1.1.4.1
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
This entry will exist : forever.
Latest value : 0
Table 8-5 Description on the fields of the display rmon prialarm command
Field Description
Prialarm table 1 Index of the prialarm entry
owned by null Owner of the prialarm entry
VALID State of prialarm entry 1 is valid
Samples absolute
value : .1.3.6.1.2.1.16.1.1.1.4.1
The sample type of the
1.3.6.1.2.1.16.1.1.1.4.1 node is absolute
Sampling interval : 10(sec) Sampling every 10 seconds
Rising threshold : 1000
Rising threshold. Rising alarm is
triggered when a sample value
reaches/exceeds this value
Falling threshold : 100
Falling threshold. Falling alarm is
triggered when a sample value
reaches/exceeds this value
linked with event 1
Event index corresponding to the
rising/falling alarm
When startup enables :
risingOrFallingAlarm
Type of the first alarm, which can be
rising alarm or falling alarm, or both
This entry will exist : forever
Lifetime of the entry, which can be
forever or span the specified period
Latest value 0 Latest sample value