Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 8 RMON Configuration Commands
3Com Corporation
8-9
Parameter
event-entry: Event index, in the range 1 to 65,535.
description string: Event description, a string of 1 to 127 characters.
log: Sets event type to log.
trap: Sets event type to trap.
trap-community: Name of the community to which trap messages are sent.
log-trap: Sets event type to log-and-trap.
log-trapcommunity: Name of the community to which trap messages are sent.
none: Event other than log, trap, and log-and-trap.
owner text: Owner of the entry, a string of 1 to 127 characters.
Description
Use the rmon event command to add an event entry.
Use the undo rmon event command to remove an event entry.
The type of notification made about an event can be: log, sending a trap to the network
management station, or both. Based on the received information, the network
management system can handle the event appropriately.
Example
# Add event entry 10 to the event table and set its type to log.
[3com] rmon event 10 log
8.1.9 rmon history
Syntax
rmon history history-control-entry buckets number interval sampling-interval [ owner
text-string ]
undo rmon history entry-number
View
Ethernet interface view
Parameter
history-control-entry: History control index, in the range 1 to 65,535.
buckets number: Specifies the number of sampling actions in a sampling period.
interval sampling-interval: Sampling interval in the range 5 to 3,600 seconds.
owner text: Owner of the specified entry, a string of 1 to 127 characters.