Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-4
By default, the asynchronous serial interface does not support redirect.
This command is only useful for AUX and TTY interfaces.
Related command: telnet, display tcp status.
Example
# Enable redirect on user interface TTY7.
[3com-ui-tty7] redirect enable
9.1.6 redirect listen-port
Syntax
redirect listen-port port-number
undo redirect listen-port
View
User interface view
Parameter
port-number: Number of the listening port, in the range 2000 to 50000.
Description
Use the redirect listen-port command to specify a port to listen for redirected Telnet
connections.
Use the undo redirect listen-port command to restore the default listening port.
The default number of the port that listens for redirected Telnet connections is TTY
number plus 2000.
Example
# Set the number of the port that listens for the redirected Telnet connections to 50.
[Router-ui-tty7] redirect listen-port
9.1.7 redirect timeout
Syntax
redirect timeout minutes
undo redirect timeout
View
User interface view