Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-10
Example
# Use 192.168.0.1 as the source IP address in the packets sent by the Telnet server.
[Router] telnet-server source-ip 192.168.0.1
9.1.15 telnet source-interface
Syntax
telnet ip-address [ port ] source-interface interface-type interface-number
View
User view, system view
Parameter
ip-address: Destination IP address.
port: Destination port number. It defaults to 23.
interface-type interface-number: Specifies the source interface for telnet.
Description
Use the telnet source-interface command to telnet from the main IP address of the
specified interface to the destination IP address.
Example
# Telnet from the source interface ethernet 1/0/1 to the destination address 2.2.2.2.
<3com> telnet 2.2.2.2 source-interface ethernet 1/0/1
9.1.16 telnet source-ip
Syntax
telnet ip-address [ port ] source-ip source-address
View
User view, system view
Parameter
ip-address: Destination IP address.
port: Destination port number. It defaults to 23.
source-address: Source IP address used when setting up a Telnet connection.