Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-15
9.2.5 display ssh-server source-ip
Syntax
display ssh-server source-ip
View
Any view
Parameter
None
Description
Use the display ssh-server source-ip command to display the source IP address
configured for the SSH server.
If a source interface has been specified for the SSH server, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the SSH server, 0.0.0.0 is displayed.
Example
# Display the current source IP address of the SSH server.
<Router> display ssh-server source-ip
The source IP specified is 0.0.0.0
9.2.6 display ssh user-information
Syntax
display ssh user-information [ username ]
View
Any view
Parameter
username: Valid SSH user name defined by AAA.
Description
Use the display ssh user-information command to view information about current
SSH users, including user name, corresponding key name and user authentication
mode. If you specify the username parameter, then only the information about the
specified user is displayed.
Related command: ssh user username assign rsa-key, ssh user username
authentication-type.