Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-23
View
User interface view
Parameter
None
Description
Use the console switch-to aux command to configure the Console interface to
operate in AUX mode.
Use the undo console switch-to command to restore the default operation mode of
the Console interface.
By default, the interface operates as a Console port, through which, you can use the
console switch-to aux command to configure the interface to operate as an AUX port,
in this case, you will be disconnected to the router and have to use another way, such
as Telnet or AUX port, to login again.
Example
# Configure interface Console 0 to operate in AUX mode and save the configuration.
[Quidway] user-interface console 0
[Quidway-ui-console0] console switch-to aux
The configuration will be written to the device.[Y/N]y.
Current configuration has been saved to the device successfully.
# Configure interface Console 0 to operate in Console mode and save the
configuration.
[Quidway] user-interface console 0
[Quidway-ui-console0] undo console switch-to
The configuration will be written to the device.[Y/N]y.
Current configuration has been saved to the device successfully
1.2 Command-Alias Configuration Commands
1.2.1 command-alias enable
Syntax
command-alias enable
undo command-alias enable
View
System view