Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-25
 Note:
You may specify a source IP address for the packets sent by the FTP server with the
ssh-server source-interface command or with the ssh-server source-ip command.
If both commands are configured, the one configured later overrides.
Example
# Use 192.168.0.1 as the source IP address in the packets sent by the SSH server.
[Router] ssh-server source-ip 192.168.0.1
9.2.19 ssh server timeout
Syntax
ssh server timeout seconds
undo ssh server timeout
View
System view
Parameter
seconds: Specifies the login timeout in the range 1 to 120 seconds.
Description
Use the ssh server timeout command to set a timeout for SSH connection
authentication at login. It becomes valid at next login.
Use the undo ssh server timeout command to restore the default, or 60 seconds.
Related command: display ssh sever.
Example
# Set authentication timeout to 80 seconds at login.
[3com] ssh server timeout 80
9.2.20 ssh user
Syntax
ssh user username
undo ssh user username