Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-29
Use the undo ssh user service-type command to restore the default service type for
the SSH user in the system.
The default service type for the SSH user is stelnet.
Related command: display ssh user-information.
Example
# Specify SFTP service for SSH user Tom.
[3com] ssh user tom service-type sftp
9.3 SSH Client Configuration Commands
 Note:
The public-key-code begin command and the public-key-code end command are
described in the section for the SSH server, but they are supported by the SSH client as
well.
9.3.1 display ssh server-info
Syntax
display ssh server-info
View
Any view
Parameter
None
Description
Use the display ssh server-info command to view the associations of public key to
SSH server maintained at the client end.
Example
# Display the public key to SSH server associations at the client end.
[3com] display ssh server-info
ServerIP public-key-name
192.168.0.1 huawei_key01
192.168.0.2 huawei_key02