Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Re
f
erence source not found.
3Com Corporation
9-46
View
System view
Parameter
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the sftp source-interface command to specify a source interface, which must be
an existing local interface, for the SFTP client. After that, the IP address of the specified
interface is used as the source IP address in each packet sent by the SFTP client.
Use the undo sftp source-interface command to delete the source interface specified
for the SFTP client. After that, the source IP address in each packet sent by the SFTP
client is that of the outgoing interface where the packet is sent out.
By default, the source IP address in each packet sent by the SFTP client is the IP
address of the interface where the packet is sent out.
 Note:
You may specify a source IP address for the packets sent by the Telnet server with the
sftp source-interface command or with the sftp source-ip command. If both
commands are configured, the one configured later overrides.
Example
# Set the source interface for the SFTP client to ethernet0/0/0.
[Router] sftp source-interface ethernet0/0/0
9.5.20 sftp source-ip
Syntax
sftp source-ip ip-address
undo sftp source-ip
View
System view
Parameter
ip-address: Source IP address.