Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 Interface Management Commands
3Com Corporation
1-9
Last 30 seconds output rate 5.59 bytes/sec, 0.13 packets/sec
Input: 492731 packets, 84128872 bytes, 492731 buffers
156266 broadcasts, 145584 multicasts, 0 pauses
79 errors, 78 runts, 0 giants
1 crc, 0 align errors, 0 overruns
0 dribbles, 0 drops, 0 no buffers
Output:230681 packets, 165591360 bytes, 230683 buffers
10916 broadcasts, 0 multicasts, 0 pauses
0 errors, 0 underruns, 0 collisions
0 deferred, 0 lost carriers
1.1.8 interface
Syntax
interface type number [ .sub-number ]
undo interface type number [ .sub-number ]
View
System view
Parameter
type: Interface type. Table 1-2 lists the interfaces that VRP supports so far.
number: Interface number. VRP numbers the interfaces separately by interface type,
with the numbers of each type of interfaces beginning at 0 or 1.
sub-number: Subinterface number, which is separated from the main interface number
by a dot (.).
Description
Use the interface command to enter the specified interface view or create a logical
interface or subinterface.
Use the undo interface command to delete a specified logical interface or
subinterface.
Table 1-2 Interfaces supported by VRP
Interface Description Attribute
ATM ATM interface Physical interface
AUX AUX interface Physical interface
AnalogModem Analog modem interface Physical interface
Async
Asynchronous serial
interface
Physical interface