Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 Interface Management Commands
3Com Corporation
1-13
1.1.10 reset counters interface
Syntax
reset counters interface [ interface-type [ interface-number ] ]
View
User view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the reset counters interface command to clear statistics about the transmitted
and received packets, IP, ARP, and ICMP on the specified interface or all interfaces.
To count the traffic size on an interface within some period, you need to clear the
existing statistics on the interface before making a new counting.
Related command: display interface.
Example
# Clear the statistics on Serial 0/0/0.
<3Com > reset counters interface serial 0/0/0
1.1.11 restart
Syntax
restart
View
Interface view
Parameter
None
Description
Use the restart command to reset the physical interface.
In some special circumstances, after modifying the operating parameters on an
interface for example, the modification cannot take effect immediately. To make new
configurations take effect, you must perform the commands shutdown and undo
shutdown on the interface, or alternatively the restart command. In remote