Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Fundamental Ethernet Interface
Configuration Commands
3Com Corporation
2-4
Output(normal): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, 0 buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
 Note:
For an SFP port, the detailed information about the optic module including vender type,
wavelength, transmission distance, and serial number as follows:
The transceiver Detail Information:
The transceiver type: Xenpak
The standard compliance: 1000BASE_CX
Transfers distance(m) :9um Fiber: 0
50um Fiber: 0
625um Fiber: 1000
copper line: 100
Serial Num is 123456789
Vender Name is 3com
3C Number is 123456789
2.1.2 duplex
Syntax
duplex { full | half | negotiation }
undo duplex
View
Ethernet interface view
Parameter
full: Sets the Ethernet interface to work in full duplex.
half: Sets the Ethernet interface to work in half duplex.
negotiation: Sets the Ethernet interface to work in auto-negotiation mode.
Description
Use the duplex command to set the operating mode of the Ethernet interface.
Use the undo duplex command to restore the default operating mode of the Ethernet
interface.