Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-2
View
Ethernet port view
Parameter
text: Port description, a string of up to 80 characters.
Description
Use the description command to configure port description. Identifying a port is the
only function of this command.
Use the undo description command to restore the default port description, that is, port
name plus interface.
Example
# Set the description of port Ethernet 1/0/1 to Ethernet-interface.
[3Com -Ethernet1/0/1] description Ethernet-interface
3.1.3 display interface
Syntax
display interface [ interface_type | interface_type interface_num | interface_name ]
View
Any view
Parameter
interface_type: Port type.
interface_num: Port number.
interface_name: Port name, in interface_type interface_num format.
Description
Use the display interface command to view configuration information on the port.
If port type and port number are not specified when displaying the port information,
information on all the ports is displayed. If only port type is specified, information on all
the ports of this type is displayed. If both port type and port number are specified,
information on the specified port is displayed.
Example
# Display configuration information on port Ethernet 1/0/1.
<3Com > display interface ethernet1/0/1
Ethernet1/0/1 current state :DOWN