Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-4
Field Description
Tagged VLAN ID
Indicates the VLAN from which the packets must
be tagged.
Untagged VLAN ID
Indicates the VLAN from which the packets are
not to be tagged.
Last 300 seconds output: 0
packets/sec 0 bytes/sec
Last 300 seconds input: 0
packets/sec 0 bytes/sec
The input and output rates as well as the input
and output packets in the last 300 seconds on
the port
Input: 6 packets, 574 bytes, 0
buffers
0 broadcasts, 0 multicasts, 0
pauses
0errors,0runts,0giants
0 crc, 0 align errors, 0 overruns
0 dribbles, 0 drops, 0 no buffers
Output: 0 packets, 0 bytes,0
buffers 0
broadcasts, 0 multicasts, 0
pauses 0 errors,
0 underruns, 0 collisions
0 deferred, 0 lost carriers
Statistics about input/output packets and errors
on the port
3.1.4 display port
Syntax
display port { hybrid | trunk }
View
Any view
Parameter
hybrid: Displays hybrid ports.
Trunk: Displays trunk ports.
Description
Use the display port command to check whether the current system has hybrid or
trunk ports. If there is any, its port name is displayed.
Example
# Display the hybrid ports in the current system.
<3Com > display port hybrid