Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-6
View
Ethernet port view
Parameter
None
Description
Use the flow-control command to enable flow control on the Ethernet port to avoid
packet drop when congestion occurs.
Use the undo flow-control command to disable flow control.
By default, flow control on the Ethernet port is disabled.
Example
# Enable flow control on port Ethernet1/0/1.
[3Com -Ethernet1/0/1] flow-control
3.1.7 interface
Syntax
interface { interface_type interface_num | interface_name }
View
System view
Parameter
interface_type: Port type. It can be Ethernet only.
interface_num: Port number.
interface_name: Port name, in interface_type interface_num format.
Description
Use the interface command to enter Ethernet port view.
Before you can configure an Ethernet port, you must enter its view first with this
command.
Example
# Enter the view of Ethernet 1/0/1 port.
[3Com ] interface ethernet1/0/1