Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-8
Use the undo mac-address timer aging command to restore the default, that is, 300
seconds.
Example
# Set the aging timer for the MAC address table on port Ethernet 1/0/1 to 20 seconds.
[3Com -ethernet1/0/1] mac-address timer aging 20
3.1.10 port access vlan
Syntax
port access vlan vlan_id
undo port access vlan
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE 802.1Q, in the range 2 to 4094.
Description
Use the port access vlan command to add the port whose link type is access to a
specified VLAN.
Use the undo port access vlan command to remove the access port from the
specified VLAN.
The default VLAN ID of access port is 1.
Example
# Add port Ethernet 1/0/1 to VLAN 3.
[3Com -Ethernet1/0/1] port access vlan 3
3.1.11 port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan_id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, in the range 1 to 4094. It defaults to 1.