Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-9
Description
Use the port hybrid pvid vlan command to assign a default VLAN ID to the hybrid
port.
Use the undo port hybrid pvid command to restore the default VLAN ID of the hybrid
port.
To ensure correct transmission of packets, the default VLAN ID of the hybrid port must
be the same as the one used by the connected hybrid port.
Related command: port link-type.
Example
# Set the default VLAN ID of hybrid port Ethernet 1/0/1 to 100.
[3Com -Ethernet1/0/1] port hybrid pvid vlan 100
3.1.12 port hybrid vlan
Syntax
port hybrid vlan vlan_id_list { tagged | untagged }
undo port hybrid vlan vlan_id_list
View
Ethernet port view
Parameter
vlan_id_list: Equals [ vlan_id1 [ to vlan_id2 ] ]&<1-10>. It specifies a range of
contiguous or discrete VLANs to which the hybrid port is to be assigned. The vlan_id
ranges from 1 to 4094. &<1-10> indicates that the former arguments can be input 10
times repeatedly at most.
tagged: The packets from the specified VLAN are to be tagged.
untagged: Packets from the specified VLAN are not to be tagged.
Description
Use the port hybrid vlan command to assign the hybrid port to the specified VLANs,
which must have existed in the system.
Use the undo port hybrid vlan command to remove the hybrid port from the specified
VLANs.
A hybrid port can belong to multiple VLANs. If multiple VLAN lists are configured using
the port hybrid vlan vlan_id_list { tagged | untagged } command, all the VLANs of
these list can pass through the port.
Related command: port link-type.