Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-10
Example
# Assign hybrid port Ethernet 1/0/1 to VLANs 2, 4 and 50 through 100. All packets from
these VLANs are to be tagged.
[3Com -Ethernet1/0/1] port hybrid vlan 2 4 50 to 100 tagged
3.1.13 port link-type
Syntax
port link-type { access | hybrid | trunk }
undo port link-type
View
Ethernet port view
Parameter
access: Sets the link type of the port to access.
hybrid: Sets the link type of the port to hybrid.
trunk: Sets the link type of the port to trunk.
Description
Use the port link-type command to configure the link type of the Ethernet port.
Use the undo port link-type command to restore the default link type of the port, that is,
access.
Example
# Set the link type of port Ethernet 1/0/1 to trunk.
[3Com -Ethernet1/0/1] port link-type trunk
3.1.14 port trunk permit vlan
Syntax
port trunk permit vlan { vlan_id_list | all }
undo port trunk permit vlan { vlan_id_list | all }
View
Ethernet port view
Parameter
vlan_id_list: Equals [ vlan_id1 [ to vlan_id2 ] ]&<1-10>. It specifies a range of
contiguous or discrete VLANs to which the hybrid port is to be assigned. The vlan_id