Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
3-12
Example
# Set the default VLAN ID of trunk port Ethernet 1/0/1 to 100.
[3Com -Ethernet1/0/1] port trunk pvid vlan 100
3.1.16 reset counters interface
Syntax
reset counters interface [ interface_type | interface_type interface_num |
interface_name ]
View
User view
Parameter
interface_type: Port type.
interface_num: Port number.
interface_name: Port name in interface_type interface_num format.
For parameter description, refer to the interface command.
Description
Use the reset counters interface command to reset the statistics about the port.
If port type and port number are not specified when clearing the statistics, information
on all the ports is cleared. If only port type is specified, information on all the ports of this
type is cleared. If both port type and port number are specified, information on the
specified port is cleared.
Example
# Clear statistics about port Ethernet 1/0/1.
<3Com > reset counters interface ethernet1/0/1
3.1.17 shutdown
Syntax
shutdown
undo shutdown
View
Ethernet port view