Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 4 Fundamental Logical Interface

Configuration Commands

3Com Corporation

4-20

Description

Use the broadcast-limit link command to configure the maximum number of links that

the virtual template supports for sending multicast or broadcast packets.

Use the undo broadcast-limit link command to restore the default.

When there are many links on the virtual template, sending multicast or broadcast

packets from each link may influence the function of the system. In this case, the

broadcast-limit link command can be used for limitation, so that multicast or

broadcast packet will be discarded if link number exceeds the limitation.

Example

# Configure maximum link number of virtual template 1 supporting sending multicast or

broadcast packet to be 100.

[3Com ] interface virtual-template 1

[3Com -Virtual-Template1] broadcast-limit link 100

4.3.2 display interface virtual-template

Syntax

display interface virtual-template [ number ]

View

Any view

Parameter

virtual-template: Virtual template.

number: Number of the virtual template, in the range 0 to 1023. If no virtual template is

specified, the state about all virtual templates is displayed.

Description

Use the display interface virtual-template command to view the state about the

specified or all virtual templates.

Example

# View the state about the specified virtual template.

<3Com > display interface virtual-template 1