Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
4-22
4.3.4 interface virtual-template
Syntax
interface virtual-template number
undo interface virtual-template number
View
System view
Parameter
number: Number of the virtual template, in the range 0 to 1023.
Description
Use the interface virtual-template command to create a virtual template or enter the
existing virtual template view.
Use the undo interface virtual-template command to delete the specified virtual
template.
You must create a virtual template before creating virtual access interfaces and disable
it after disabling the virtual access interface.
In deleting a virtual template, make sure that all its virtual access interfaces have been
removed and this virtual template is not in use any more.
Example
# Create virtual template 10.
[3Com ] interface virtual-template 10
[3Com -Virtual-Template10]
4.4 MP-Group Interface Configuration Commands
4.4.1 display interface mp-group
Syntax
display interface mp-group [ number ]
View
Any view
Parameter
number: Number of the MP-group interface. If no MP-group interface is specified, the
state about all MP-group interfaces is displayed.