Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Fundamental Logical Interface
Configuration Commands
3Com Corporation
4-23
Description
Use the display interface mp-group command to view the state about the specified or
all MP-group interfaces.
Example
# Display the state about all MP-group interfaces.
<3Com > display interface mp-group
4.4.2 interface mp-group
Syntax
interface mp-group number
undo interface mp-group number
View
System view
Parameter
number: Number of MP-group interface, in the range 0 to 1023. That is, an interface
board supports up to 1024 MP-group interfaces.
Description
Use the interface mp-group command to create an MP-group interface.
Use the undo interface mp-group command to delete the specified MP-group
interface.
Use this command in conjunction with the ppp mp mp-group command to create an
MP-group interface and add an interface to it. These two tasks are order independent.
Example
# Create MP-group interface 3.
[3Com ] interface mp-group 3
[3Com -mp-group 3]
4.5 Virtual Ethernet Interface Configuration Commands
4.5.1 display interface virtual-ethernet
Syntax
display interface virtual-ethernet [ number ]