Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-4
1.1.3 ppp mp binding-mode
Syntax
ppp mp binding-mode { authentication | both | descriptor }
undo ppp mp binding-mode
View
Virtual template interface view, dialer interface view
Parameter
authentication: Performs the MP binding according to the authentication user name of
PPP.
both: Performs the MP binding based on both the authentication user name of PPP
and the terminal identifier.
descriptor: Performs the MP binding according to the terminal identifier.
Description
Use the ppp mp binding-mode command to set the MP binding condition.
Use the undo ppp mp binding-mode command to restore the default value of the MP
binding condition.
By default, it performs the MP binding based on both the authentication user name of
PPP and the terminal identifier.
User name is the peer one received by the PPP link performing the PAP or CHAP
authentication, while the terminal identifier, as a unique flag of a Router, is the peer one
received in performing the LCP negotiation. The system can perform the MP binding
base on the received user name and terminal identifier, and then the interfaces with the
identical user name or the same terminal identifier is bound together.
Related command: ppp mp user.
Example
# Perform MP bundling only based on the user name of the PPP authentication.
[3Com-Dialer0] ppp mp binding-mode authentication
1.1.4 ppp authentication-mode
Syntax
ppp authentication-mode { chap | pap } [call-in | domain isp-name ]
undo ppp authentication-mode