Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-14
[3Com-Serial3/0/0] ppp mp mp-group 3
# Remove serial interface 3/0/0 from MP-group 3.
[3Com-Serial3/0/0] undo ppp mp mp-group 3
1.1.15 ppp mp lfi
Syntax
ppp mp lfi [ delay-per-frag max-delay ]
undo ppp mp lfi [ delay-per-frag ]
View
Virtual template interface view
Parameter
max-delay: Maximum delay in millisecond, its value ranges from 1 to 1000.
Description
Use the ppp mp lfi command to configure the link fragmentation and interleaving
features.
Use the undo ppp mp lfi command to restore the default configuration.
By default, the value of number is 10.
Example
# Set a maximum delay of 100 milliseconds for per fragmentation.
[3Com-Virtual-Template0] ppp mp lfi delay-per-frag 100
1.1.16 ppp mp max-bind
Syntax
ppp mp max-bind max-bind-num
undo ppp mp max-bind
View
Virtual template interface view, dialer interface view
Parameter
max-bind-num: Indicates maximum number of links which can be bound, in the range
from 1 to 128.