Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-15
Description
Use the ppp mp max-bind command to configure maximum number of bound links of
MP.
Use the undo ppp mp max-bind command to restore the default configuration.
By default, its value is 16.
Normally, it is not necessary to configure the parameter, which should be performed
under the guidance of technical engineers when necessary. Such a configuration may
have impact on the performance of PPP. If it is necessary to bind more than 16 PPP
channels, the parameter max-bind-num can be changed.
 Note:
If MP fails to delete links, it is possible that the maximum binding number is smaller
than the actually configured one. Make sure that the maximum binding number should
be larger than the actual one.
After you change the maximum number of links in an MP bundle on a virtual-template
or dialer interface, you must shutdown and undo shutdown all the physical interfaces
to validate the modification.
Related command: ppp mp.
Example
# Set the maximum number of bound links to 12.
[3Com-Virtual-Template10] ppp mp max-bind 12
1.1.17 ppp mp min-bind
Syntax
ppp mp min-bind min-bind-num
undo ppp mp min-bind
View
Dialer interface view
Parameter
min-bind-num: Minimum number of links in an MP bundle, in the range 1 to 128.