Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-19
View
Interface view
Parameter
number: Configures the virtual template number to be bound by the interface, which
ranges from 0 to 1023.
Description
Use the ppp mp virtual-template command to configure the virtual template number
to be bound by the interface.
Use the undo ppp mp command to disable the MP binding of the interface.
By default, the MP binding of the interface is disabled, and the interface works in
ordinary PPP mode.
This command specifies the virtual template number to be bound on the interface. The
interface using this command to perform the MP binding needs not configuring PAP or
CHAP authentication. Two or more interfaces with the same virtual template number is
bound directly together. Moreover, this command is mutually exclusive with the ppp mp
command. That is, only one of the two commands can be configured on a same
interface.
Related command: link-protocol ppp and interface virtual-template.
Example
# Configure the PPP encapsulated interface Serial0/0/0 to work in MP mode.
[3Com-Serial0/0/0] ppp mp virtual-template 1
1.1.22 ppp pap local-user
Syntax
ppp pap local-user username password { simple | cipher } password
undo ppp pap local-user
View
Interface view
Parameter
username: Username sent, which is a string of 1 to 80 characters.
password: Password sent.
simple: Indicates to display the password in plain text.
cipher: Indicates to display the password in ciphertext.