Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-28
1.2.10 ppp compression stac-lzs
Syntax
ppp compression stac-lzs
undo ppp compression stac-lzs
View
Interface view
Parameter
None
Description
Use the ppp compression stac-lzs command to enable STAC-LZS compression for
PPP.
Use the undo ppp compression stac-lzs command to disable STAC-LZS
compression on the current interface.
By default, compression is disabled.
You can configure STAC-LZS compression on an interface to reduce size of data
frames through lossless compression. However, as this can increase the load on the
router, you are recommended to disable the function when the load on the router is
heavy.
Note that STAC-LZS compression can take effect on a PPP link only when the stac-lzs
option is configured on both ends of the link.
Related command: link-protocol ppp.
Example
# Enable STAC compression on the local router.
[3Com-Serial0/0/0] ppp compression stac-lzs
1.2.11 ppp mp lfi
Syntax
ppp mp lfi
undo ppp mp lfi
View
Virtual template interface view, MP-group interface view