Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 PPP and MP Configuration Commands
3Com Corporation
1-29
Parameter
None
Description
Use the ppp mp lfi command to enable link fragmentation and interleaving (LFI) on the
interface.
Use the undo ppp mp lfi command to remove LFI from the interface.
By default, the time delay of the fragment is 10ms after LFI is enabled on the Virtual
Template interface.
Related command: ppp mp lfi delay-per-frag.
Example
[3Com-Virtual-Template1] ppp mp lfi
1.2.12 ppp mp lfi delay-per-frag
Syntax
ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
View
Virtual template interface view, MP-group interface view
Parameter
time: The maximum time delay of LFI fragment in ms, in the range of 1 to 1000.
Description
Use the ppp mp lfi delay-per-frag command to set the maximum time delay for
transmitting a LFI fragment.
Use the undo ppp mp lfi delay-per-frag command to restore the default maximum
time delay for transmitting an LFI fragment.
By default, the time delay of the fragment is 10ms after LFI is enabled on the Virtual
Template interface.
Related command: ppp mp lfi.
Example
# Set the maximum time delay of LFI fragment of Virtual-Template 1 to 20ms.
[3Com-Virtual-Template1] ppp mp lfi delay-per-frag 20