Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 PPPoE Configuration Commands
3Com Corporation
2-1
Chapter 2 PPPoE Configuration Commands
2.1 PPPoE Server Configuration Commands
2.1.1 display pppoe-server session
Syntax
display pppoe-server session { all | packet | statistics interface interface-type
interface-number }
View
Any view
Parameter
all: Displays all information about each PPPoE session.
packet: Displays statistics about the packets on each PPPoE session.
statistics: Displays the statistics information of PPPoE sessions over an interface.
interface-type interface-number: Specifies an interface.
Description
Use the display pppoe-server session command to view the status and statistics of
PPPoE session.
Related command: link-protocol ppp, pppoe-server bind.
Example
# View all the session information of PPPoE.
<3Com> display pppoe-server session all
SID Intf OIntf RemMAC LocMAC State
1 Virtual-Template1:1 GigabitEthernet1/0/0 00e0fc000501 00e0fc000100 UP
Table 2-1 Output information description
Field Description
SID Session Identifier
Intf
The corresponding Virtual-Template
interface
OIntf corresponding Ethernet interface
RemMAC Remote MAC address