Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 PPPoE Configuration Commands
3Com Corporation
2-2
Field Description
LocMAC Local MAC address
State State of sessions
# View the statistics information of PPPoE session.
<3Com> display pppoe-server session packet
SID RemMAC LocMAC InP InO InD OutP OutO OutD
1 0050ba1a02ce 0001af02a40f 42 2980 0 16 343 0
Table 2-2 Description of the output
Field Description
InP In Packets, Packages received
InO In Octets, Bytes received
InD
In Discards, Received and then
discarded packages
OutP Out Packets, Packages sent
OutO Out Octets, Bytes sent
OutD
Out Discard, Discarded packages that
might be sent.
2.1.2 pppoe-server bind virtual-template
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
View
Interface view
Parameter
number: Number of the virtual-template for access to PPPoE, and its value ranges from
0 to 1023.
Description
Use the pppoe-server bind virtual-template command to enable PPPoE on the
virtual-template specified by the Ethernet interface.
Use the undo pppoe-server bind command to disable PPPoE protocol on the
relevant interface.