Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 PPPoE Configuration Commands
3Com Corporation
2-6
Parameter
all: Clears all PPPoE sessions.
virtual-template number: Specifies a virtual template by its number.
interface interface-type interface-num: Specifies an interface by its type and number.
Description
Use the reset pppoe-server command to clear PPPoE sessions at the server end.
Example
# Clear the sessions on virtual template 1.
<Router> reset pppoe-server virtual-template 1
2.2 PPPoE Client Configuration Commands
2.2.1 debugging pppoe-client
Syntax
debugging pppoe-client option [ interface type number ]
View
User view
Parameter
option: PPPoE Client debugging switch type, see the following table for more details.
interface type number: Interface type and number, used to enable the debugging
switch of the specified interface. If no interface is specified, the system will enable the
debugging switch of all interfaces.
Table 2-3 PPPoE Client debugging switch type and explanation
Debugging switch Description
All
Enable all PPPoE Client debugging
switches
data
Enable the PPPoE Session phase data
packet debugging switch
error
Enable PPPoE Client error information
debugging switch
event
Enable PPPoE Client event debugging
switch
packet
Enable PPPoE Discovery phase
negotiation packet debugging switch