Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 PPPoE Configuration Commands
3Com Corporation
2-7
Debugging switch Description
verbose
Display the verbose contents of PPPoE
data
Description
The command debugging pppoe-client is used to enable PPPoE Client debugging
switch.
Example
None
2.2.2 display pppoe-server session
Syntax
display pppoe-client session { summary | packet } [ dial-bundle-number number ]
View
Any view
Parameter
summary: Displays the summary of PPPoE session.
packet: Displays the statistics of PPPoE session data packet.
dial-bundle-number number: Displays the statistics of the specified PPPoE session. If
PPPoE session is not specified, the system will display the statistics of all PPPoE
sessions.
Description
The command display pppoe-client session is used to display the status and
statistics of PPPoE session.
Example
# Display the summary of PPPoE session.
[3Com] display pppoe-client session summary
PPPoE Client Session:
ID Bundle Dialer Intf Client-MAC Server-MAC State
1 1 1 Eth0 00e0fc0254f3 00049a23b050 PPPUP
2 2 2 Eth0 00e0fc0254f3 00049a23b050 PPPUP
For more details of the display information, see the following table.