Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 PPPoE Configuration Commands
3Com Corporation
2-10
Related command: reset pppoe-client.
Example
# Create a PPPoE session on the interface Ethernet 0/0/0.
[3Com-Ethernet0/0/0]pppoe-client dial-bundle-number 1
2.2.4 reset pppoe-client
Syntax
reset pppoe-client { all | dial-bundle-number number }
View
User view
Parameter
all: Clears all PPPoE sessions.
dial-bundle-number number: Dialer Bundle number, its value ranges from 1 to 255.
Used to clear the PPPoE session corresponding to Dialer Bundle.
Description
Use the reset pppoe-client command to terminate PPPoE session and re-initiate the
connection later.
If PPPoE session in permanent online mode is terminated using the command reset
pppoe-client, the Router will automatically re-establish PPPoE session in sixteen
seconds. If PPPoE session is terminated in packet trigger mode using the command
reset pppoe-client, the Router will not re-establish PPPoE session unless it has data
to transmit.
Related command: pppoe-client.
Example
# Clear all PPPoE sessions, and re-initiate PPPoE session later.
<3Com> reset pppoe-client all