Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-1
Chapter 1 System Maintenance and Management
Commands
1.1 Auto-Config Commands
1.1.1 auto-config
Syntax
auto-config
View
System view
Parameter
None
Description
Use the auto-config command to implement the auto-config operation.
Enabling auto-config is equivalent to executing commands in batch.
Caution:
The auto-config command is usually used at initial boot to execute commands in batch.
As this changes the current configurations and no undo form is available, you must
take caution when using it on a network where configuration is completed.
Although the auto-config function is available with vrpcfg.def, the default configuration
file, you cannot save the configuration of the auto-config command.
The auto-config command runs these commands:
1) Enabling FTP and configuring the VTY (Telnet) and TTY (through AM interface)
users to adopt local authentication
ftp server enable
user-interface vty 0 4
authentication-mode scheme
user-interface tty user-interface-number